Micromechanical Characterization of Damage-Plasticity in Metal Matrix Composites
A micromechanical theory of damage mechanics and plasticity is proposed for fiber-reinforced metal matrix composites. The composite system is assumed to consist of elastic, continuous...
Fracture Toughness Model of Fiber Reinforced Ceramics
This paper addresses the fracture resistance mechanism in fiber reinforced ceramics, and focuses attention on the specific effects associated with the nonlinear nature of the fiber pullout...
A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Micromechanics Based Design for Pseudo Strain-Hardening in Cementitious Composites
Micromechanical model constructed on the basis of fracture mechanics and fiber bridging provides a means of selection of fiber, matrix and interface property combinations for which short...
Effect of Micro-parameters on the Macroscopic Behaviour of Ductile Fiber Reinforced Brittle Matrix Composites
In this paper, the modelling of crack bridging stress vs crack opening (?-?) relation of ductile fiber brittle matrix composite in terms of its microscopic parameters is described. Parametric...
Fiber Suppressed Localization in Tension
Tensile fracture in portland cement based fiber composites is studied. Formation and propagation of stable microcracks is examined by means of holographic interferometry. Distributed microcracking...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
The Effect of Multiple Compliant Layers at the Fiber-Matrix Interface on Residual Thermal Stresses in Metal Matrix Composites
The large mismatch in thermoelastic properties of the fiber and matrix phases in advanced metal matrix composites, coupled with high consolidation temperatures, produces severe residual...
Measuring Vibration in an Advanced Composite Beam with Localized Internal Fiber-Optic Strain Sensors
Two optical fibers embedded with different configurations were used separately as strain sensors to measure the natural frequencies and modal amplitudes of a cantilevered graphite/bismaleimide...
Composite Materials for Structures on Planetary Surfaces
Development of structures for planetary surface environments depends upon the use of the most appropriate materials. Advanced composite materials are apparently the best candidates for...
Comparison of Micromechanical Models for Elastic Properties
The effective elastic properties for unidirectional composites, as predicted by several analytical micromechanical models are compared for glass/epoxy and graphite/epoxy. A brief review...
Optimum Design of Laminated Composites
The increased demand for high strength, light weight materials that function successfully in high temperature environments has caused the effective development of laminated composites...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Fiber: Good For the Concrete Diet?
Fiber reinforcement of concrete has many advantages, but after thirty years of research those benefits have most often been seen in a laboratory. Some materials, such as synthetic fibers,...
Intersection Air Quality Analysis
Methods of carbon monoxide concentration estimation at or near intersections have recently undergone scrutiny with resulting debate on the proper and accurate ways to make these estimates...
Return to search